User Guide

Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-42-4
2-42-4
2-4
2.2 Motherboard information
The barebone server comes with the NCLV-D(A) motherboard already
installed. The motherboard is secured to the chassis by nine (9) screws as
indicated by the circles in the illustration below.
NCLV-D
Refer to “Chapter 4 Motherboard information” for detailed information
on the motherboard.
Place this sidePlace this side
Place this sidePlace this side
Place this side
towards the reartowards the rear
towards the reartowards the rear
towards the rear
of the chassisof the chassis
of the chassisof the chassis
of the chassis
Make sure to unplug the power cord before installing or removing any
motherboard component or connection. Failure to do so may cause you
physical injury and may damage motherboard components.