User's Manual

6-406-40

6-40

Chapter 6: Driver installationChapter 6: Driver installation

Chapter 6: Driver installation

Line SpeedLine Speed

Line Speed

• Auto-Negotiate (default) (all speeds advertised)

• 10 Mbps Half-Duplex Fixed

• 10 Mbps Half-Duplex Auto (only 10 Mbps half-duplex advertised)

• 10 Mbps Full-Duplex Fixed

• 10 Mbps Full-Duplex Auto (only 10 Mbps full-duplex advertised)

• 100 Mbps Half-Duplex Fixed

• 100 Mbps Half-Duplex Auto (only 100 Mbps half-duplex advertised)

• 100 Mbps Full-Duplex Fixed

• 100 Mbps Full-Duplex Auto (only 100 Mbps full-duplex advertised)

• 1000 Mbps Half-Duplex Auto (only 1000 Mbps half-duplex advertised)

• 1000 Mbps Full-Duplex Fixed*

• 1000 Mbps Full-Duplex Auto (only 1000 Mbps full-duplex advertised)

Flow ControlFlow Control

Flow Control

• Disabled

• Auto Negotiation (Symmetric Pause advertised)*

• Receive Pause

• Transmit Pause

• Receive & Transmit Pause

• Auto-negotiation of Flow Control is only valid when the Line Speed is set

to AutoNegotiate (all speeds advertised or single speed advertised).

* Default setting. When selected or configured, a kernel relink and

restart is required before the new configuration takes effect.

*1000 Mbps (1 Gbps) full-duplex, fixed speed is only valid for fiber

connections. For copper, twisted-pair connections, 1 Gbps can only be

set through auto-negotiation with a 1 Gbps link partner.