User's Manual

ManualsBrandsAsus ManualsServers & WorkstationsAP1600R-E2(BA2)

131

132

133

134

135

136

137

138

139

140

ASUS AP1600R-E2 (BA2/BI2)ASUS AP1600R-E2 (BA2/BI2)

ASUS AP1600R-E2 (BA2/BI2)

6-396-39

6-39

6.2.6.26.2.6.2

6.2.6.2

UnixWare/OpenUnix 8UnixWare/OpenUnix 8

UnixWare/OpenUnix 8

OverviewOverview

Overview

Follow these instructions when installing the Broadcom

Gigabit LAN

controller drivers on a UnixWare/OpenUnix 8 system.

Flow ControlFlow Control

Flow Control

• Off

• AutoNegotiate (Symmetric Pause advertised)*

• RxPause

• TxPause

• RxPause/TxPause

• Auto-negotiation of Flow Control is only valid when the Line Speed is set

to AutoNegotiate (all speeds advertised or single speed advertised).

* Default setting. When selected or configured, a kernel relink and

restart is required before the new configuration takes effect.

1. Use the following command to install the bcme package on the

Unixware system:

pkgadd -d <install-path>

Where <install-path> is the full path name of the installable package

bcme-<version>.pkgbcme-<version>.pkg

bcme-<version>.pkg.

2. After installing the package, use

netcfg netcfg

netcfg or

scoadmin network scoadmin network

scoadmin network to

add the network adapter.

3. When prompted, select the

Line SpeedLine Speed

Line Speed, then select

AdvancedAdvanced

Advanced

Option Option

Option for Flow Control, MAC Address, and Jumbo MTU Size settings.

Change these settings, if desired.

Listed on the next page are the settings for these properties.

The network adapter driver is released as an installable package in

datastream format.