Manualshelf

User's Manual

ManualsBrandsAsus ManualsServers & WorkstationsAP1600R-E2(BA2)
131132133134135136137138139140
ASUS AP1600R-E2 (BA2/BI2)ASUS AP1600R-E2 (BA2/BI2)
ASUS AP1600R-E2 (BA2/BI2)ASUS AP1600R-E2 (BA2/BI2)
ASUS AP1600R-E2 (BA2/BI2)
6-356-35
6-356-35
6-35
6.2.4.26.2.4.2
6.2.4.26.2.4.2
6.2.4.2
Novell NetWare Server 6.5Novell NetWare Server 6.5
Novell NetWare Server 6.5Novell NetWare Server 6.5
Novell NetWare Server 6.5
Follow these instructions when installing the Broadcom
®
Gigabit LAN
controller drivers on a Novell NetWare Server 6.5 system.
Make sure that you install the latest support pack before installing the
LAN driver. The latest support packs may be downloaded from: http://
support.novell.com/misc/patlst.htm.
Creating an archive diskCreating an archive disk
Creating an archive diskCreating an archive disk
Creating an archive disk
Refer to the previous section for details on how create an archive disk.
Installing the driversInstalling the drivers
Installing the driversInstalling the drivers
Installing the drivers
To install the Broadcom
®
Gigabit LAN controller driver on a Novell NetWare
Server 6.5 OS:
1. From the NetWare Server console, type
HDETECTHDETECT
HDETECTHDETECT
HDETECT, then press <Enter>.
2. From
OptionsOptions
OptionsOptions
Options, press <Enter> to accept Platform Support Module and
HotPlug Support Module. The system detects the installed devices.
3. From
OptionsOptions
OptionsOptions
Options, scroll down to select
ModifyModify
ModifyModify
Modify, then press <Enter> to
focus on the detected devices.
4. Scroll down to
Network boardsNetwork boards
Network boardsNetwork boards
Network boards, then press <Enter>.
5. From the
Additional Driver OptionsAdditional Driver Options
Additional Driver OptionsAdditional Driver Options
Additional Driver Options, scroll down to select
ModifyModify
ModifyModify
Modify, then press <Enter>.
6. Place the support CD or archive disk to the optical drive, then select
the
AddAdd
AddAdd
Add option by pressing <Insert>.
7. Select the
Install an unlisted driverInstall an unlisted driver
Install an unlisted driverInstall an unlisted driver
Install an unlisted driver option by pressing <Insert>.
6. If you are using the archive disk, insert the floppy disk to the floppy
disk drive, then press <Enter>.
If you are using the support CD mounted as a NetWare volume, press
F3, then type
NetWare\Driver NetWare\Driver
NetWare\Driver NetWare\Driver
NetWare\Driver from the <Volume Name>: prompt.
The <Volume Name> is the name of the NetWare Volume for the
support CD and NetWare\Driver is the directory of the installation files
on the support CD.Place the support CD or driver disk created using the
Broadcom MakeDisk utility, and select the Add option, by pressing Insert.
9. When the name of the driver appears, press <Down Arrow> or <Tab>
to return to the
Additional Driver OptionsAdditional Driver Options
Additional Driver OptionsAdditional Driver Options
Additional Driver Options.
10. Select
Return to driver summaryReturn to driver summary
Return to driver summaryReturn to driver summary
Return to driver summary, then press <Enter>.
11. Select
Continue Continue
Continue Continue
Continue from
OptionsOptions
OptionsOptions
Options.
12. Select
Continue Continue
Continue Continue
Continue from the
Protocol OptionsProtocol Options
Protocol OptionsProtocol Options
Protocol Options; otherwise configure
and bind the protocols before continuing.
Installation is now complete.