User's Manual

Chapter 6: Driver installationChapter 6: Driver installation

Chapter 6: Driver installation

6-46-4

6-4

The

Array Configuration Utility Array Configuration Utility

Array Configuration Utility menu lets you create and

manage RAID sets. The

Disk Utilities Disk Utilities

Disk Utilities allows you to check and verify

SATA hard disk drives.

At the bottom of the screen is the legend box. The keys on the

legend box allow you to navigate through the setup menu options or

execute commands. The keys on the legend box vary according to the

menu level.

6.1.4.16.1.4.1

6.1.4.1

Creating a RAID 0 set (Striped)Creating a RAID 0 set (Striped)

Creating a RAID 0 set (Striped)

To create a RAID 0 set:

1. From the Adaptec RAID Configuration Utility initial menu, highlight

Array Configuration UtilityArray Configuration Utility

Array Configuration Utility, then press <Enter>.

2. From the Main Menu, select

Create ArrayCreate Array

Create Array, then press <Enter>.

3. Use the arrow keys to highlight an option.