User's Manual

6-186-18

6-18

Chapter 6: Driver installationChapter 6: Driver installation

Chapter 6: Driver installation

3. When prompted, press <Y> to delete the RAID set or press <N> to

abort the operation.

4. When prompted, use the arrow keys to select either

Member#0 Member#0

Member#0 or

Member#1Member#1

Member#1 to delete a RAID 1 set member. Select

[None] [None]

[None] or

[Both] [Both]

[Both] if you want to delete the entire array.

5. To verify if the array was deleted, select

Manage Arrays Manage Arrays

Manage Arrays from the

main menu. A

No Arrays Present No Arrays Present

No Arrays Present message pops up on the screen

if no array is detected.