User manual

WL-AM604g 11g WiFi ADSL Router User Manual
29
LINKAP ACT
xDSL LAN
4 3 2 1
!
Setting up the default gateway
This section allows you to manually set up the default gateway of Internet connection.
1. Click
Advanced Setup -> Routing -> Default Gateway
to open the conguration page.
2. By default, automatic assigned default gateway is enabled, that is, the router
accepts the first received gateway assignment from ISP. If your ISP specifies a
gateway, uncheck
Enable Automatic Assigned Default Gateway
and enter the
gateway address.
3. Press
Save/Apply
to save and activate the settings.
Setting up the static route
For simple networks with only one router, you do not need to set up the static route. For
more complicated network such as an enterprise network where several routers and
different subnets exist, you need to congure static routes so as to direct the network
trafc correctly.
1. Click
Advanced Setup -> Routing -> Static Route
to open the conguration page
and view the current static route settings. Press
Add
to create a new static route.
2. The congurable settings include:
•
Destination Network:
Key in the destination IP address.
•
Subnet Mask:
Key in the destination subnet mask.
•
Use Gateway IP Address:
Key in the gateway network address (optional).
•
User Interface:
Select the interface of your router to which the static route
applies.
3. Press
Save/Apply
to save and activate the settings.