Asus AISDetector : User Manual : Page 14

ASUS, Inc.

13

2.3.3 Select training data source

 You can select training data from the following three (3) data sources.

1. Use on-site accelerometer.

2. Load or select single or multiple recording files

3. Import an entire folder of sound recordings.

 For all sound recording using a microphone, you can define the recording angle.

 Even after the setup is complete, you can still change the training parameters

prior to training if needed.

 Click Start to initiate the training. During the training process, the loss curves on

the X, Y, and Z axes, as well as the elapsed and remaining time, are displayed in

the main pane.