Manual

AIR334

AIR3

To program an alarm:

1. Go to Conﬁguration > Alarm > Turn On (1)/(2) or XXX

Minutes (NAP).

You can program two different alarms or set a nap alarm that will

set off after XXX minutes.

2. Select Set Alarm Time and enter values. Refer to the “Text

entry” section on page 18 for details about entering numbers.

3. Select Set Alarm Sound to choose a sound type from Beep,

Melody, Radio (the station you last listened to), and iPod (the

iPod music you last played).

4. The / /XXX icon will appear at the upper right corner of the

display to indicate that the alarm function is activated.

Ensure that the device is in Standby mode at the set time, or the

alarm will not set off. When the alarm sets off, press any button to

stop it.

Language

Refer to page 17 for details about language selection.

Dimmer

The Conﬁguration > Dimmer option allows you to adjust the

brightness of the device backlight. You can also shift the backlight

mode by pressing the Dimmer button ( ) on the remote control

(or top panel). Three modes are available:

• Turn Off: Select to turn off the backlight.

• Power Saving: Select to turn down the backlight.

• Turn On: Select to turn on the backlight.