User`s manual

ASUS AGP-V3800 Series User’s Manual38

III. Windows 95/98

Advanced

Advanced provides some advanced settings for StereoGlasses (setting is available

only with the ASUS AGP-V3800 Deluxe model or AGP-V3800TV model with the

VR Stereoscope upgrade), Direct3D and OpenGL, software interfaces for your ASUS

AGP-V3800 3D graphics board.

StereoGlasses

Enable Stereoscopic Mode

When selected, this enables you to use the stereo-

scopic mode when playing games or watching 3D

videos. This mode is available only

Strereoscopic Glasses

Eyes

Distance between your eyes.

Distance

Distance between foreground and eyes.

Embossment

The effect to make objects virtually pop out of the

screen.

Load Default

Restores the settings to their defaults.

IMPORTANT! Before enabling stereoscopic mode and using your stereoscopic

or VR glasses (ASUS VR-100G), make sure that your monitor can support 120Hz

interlaced mode under the following display modes:

640 x 480 x 16 bits 640 x 480 x 32 bits

800 x 600 x 16 bits 800 x 600 x 32 bits

960 x 720 x 16 bits

1024 x 768 x 16 bits

1152 x 864 x 16 bits

WARNING! To prevent discomfort and eye fatigue when using your stereoscopic

or VR glasses, DO NOT try to use your VR glasses for an extended period of

time. Take frequent short breaks to give your muscles and eyes a chance to rest by

taking off your VR glasses and then looking up and focusing on distant objects.