Product specifications

> ppp 2 pvc 0 32 ↵
(Set channel 2 to VPI=0, VCI=32)
> ppp 2 interface 0 ↵
> ppp 2 tunnel 1 pptp out ↵
> ppp 2 enable ↵
> pptp bind 192.168.10.2 ↵
> pptp 1 create listen ↵
> config save ↵
> restart ↵
• PPTP dial in
In the following example, the PC connects to the ADSL Router firstly must be configured as:
IP address of PNS : 192.168.10.1
Subnet mask of PNS : 255.255.255.0
Gateway of PNS : 192.168.10.2
IP address of PAC : 192.168.10.2
> ip device add Ethernet ether //edd 192.168.10.2 ↵
> config save ↵
> restart ↵
> ppp 2 pvc 0 32 listen ↵
(Set channel 2 to VPI=0, VCI=32)
> ppp 2 interface 0 ↵
> ppp 2 tunnel 1 pptp in ↵
> ppp 2 enable ↵
> pptp bind 192.168.10.2 ↵
> pptp 1 create 192.168.10.1 ↵
> config save ↵
> restart ↵
The PPTP configuration can be removed by following procedure. Please ensure to remove the PPTP configuration before
set the ADSL modem to other configuration
• Remove PPTP either dial out or dial in
> ip device flush ↵
> config save ↵
> restart ↵
> ppp 2 pvc none ↵
> ppp 2 interface 0 ↵
> ppp 2 tunnel 0 ↵
> ppp 2 disable ↵
> pptp 1 delete ↵
> pptp bind none ↵
> config save ↵
> restart ↵
- 24 -