Specifications

2-262-26

2-26

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

2.5.12.5.1

2.5.1

APM configurationAPM configuration

APM configuration

This menu shows the Advanced Power Management (APM) configuration

settings. Select an item then press <Enter> to display a pop-up menu with

the configuration options.

Select Menu

Item Specific Help

AC Power Recovery [Former Sts]

HDD Down In Suspend [Disabled]

PWR Button < 4 secs [Instant-Off]

WOL (PME#) From Soft-Off [Enabled]

WOR (RI#) From Soft-Off [Enabled]

Power-On by Alarm [Disabled]

x Date (of Month) 0

x Resume Time (hh:mm:ss) 0 : 0 : 0

PS2 Keyboard Power On [Disabled]

PS2 Mouse Power On [Disabled]

APM Configuration

AC Power RecoveryAC Power Recovery

AC Power Recovery

[Former Sts][Former Sts]

[Former Sts]

Allows you to set whether or not to reboot the system after power

interruptions. [System Off] leaves your system off while [System On]

reboots the system. [Former Sts] sets the system back to the state it was

before the power interruption. Configuration options: [System Off]

[System On] [Former Sts]

HDD Down In Suspend [Disabled]HDD Down In Suspend [Disabled]

HDD Down In Suspend [Disabled]

Configuration options: [Disabled] [Enabled]

PWR Button < 4 secs [Instant-Off]PWR Button < 4 secs [Instant-Off]

PWR Button < 4 secs [Instant-Off]

Allows you to set the event after the power button is pressed for more

than 4 seconds. Configuration options: [Suspend] [Instant-Off]

WOL (PME#) From Soft-Off [Enabled]WOL (PME#) From Soft-Off [Enabled]

WOL (PME#) From Soft-Off [Enabled]

Allows you to enable or disable the Wake-On-LAN feature. This feature

requires an ATX power supply that provides at least 1A on the +5VSB lead.

Configuration options: [Disabled] [Enabled]