User Guide

AMD-RAIDXpert2 User Guide
53987 Rev. 3.01 June 2016
84
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
After the secure erase is complete, a user can choose to manually delete the array or reuse it. If the
user chooses to reuse it, it must be unhidden using the procedure in Section 6.6.15, Hide an Array,
on page 83.
CAUTION: When an array is securely erased, the data on the array is lost.
6.6.16.1 Securely Erasing an Array
1. In the Array View section, select the array to erase.
2. At the Array menu, select Secure Erase, then click OK.
6.7 Working with Views
The View menu allows the user to:
 Display the event view.
 Display the event log.
 Refresh the display.
6.7.1 Display or Hide Controller Event Log Panel
To display or hide the Controller Event Log, select Event View at the View menu. When the
Controller Event Log panel displays, a checkmark appears next to the Event View option at the
View menu.
6.7.2 Log Window
The [system name]: View Log window displays all of the messages generated by RAIDXpert2.
All messages are logged, not just the ones enabled at Options > Notification.
All messages received from the RAIDXpert2 driver are sent to a message log file. If desired,
change the name of this file in the Notification window.
By default, notification events in Windows-based systems are saved to:
%Program Files%\RAIDXpert2\rc_service.log.
Notification events in Linux-based systems are saved to /var/log/rc_service.log.
At the View menu, select Log to view the RAIDXpert2 messages.
6.7.3 Refresh the Display
To refresh the display, select Refresh at the View menu.