User Guide

53987 Rev. 3.01 June 2016
AMD-RAIDXpert2 User Guide
Chapter 6
AMD RAIDXpert2 Graphical User Interface (GUI)
65
Table 17. Elements of the Disk List Section, Array Status Window (Continued)
Element
Description
Firmware
Disk manufacturer’s firmware version.
Space Available
Total amount of space unused on the disk.
Largest Available
Largest contiguous unused space on the disk.
Features
Information about port communication and physical disk cache settings.
If a disk is missing from the Disk List, the most likely cause is:
 A loose cable. Make sure that all disk cables are connected, then perform a rescan.
 A disk that is not fully seated in its bay or slot. Make sure that the disk is inserted completely
in its bay or slot, then perform a rescan.
For more information, see Section 6.5.2, Rescan Disks, on page 69.
6.4.3 The Array List Section of the Array Status Window
6.4.3.1 Elements of the Array List Section
The Array List section provides information about the arrays. Table 18 provides information about
the elements of the Array List section.
Table 18. Elements of the Array List Section, Array Status Window
Element
Description
Device
The array number.
Partition
Drive letter that was assigned to this array during the partition process. (A
blank space appears if the array has not been partitioned.)
Note: If a dynamic volume is created on an array, RAIDXpert2 cannot
retrieve the volume’s drive letter.
Array Name
User-created name for the array.
Type
The RAID level (RAID type) or LEGACY.