User Guide
Table Of Contents
- AMD -RAIDXpert2 User Guide
- Contents
- List of Tables
- Revision History
- Preface
- Chapter 1 Safety Precautions
- Chapter 2 Getting Started
- Chapter 3 Arrays, Disks and RAID Levels
- 3.1 Understanding Arrays
- 3.2 RAID Levels
- 3.3 Array States
- 3.4 Creating Arrays: Future Expansion
- 3.5 Expanding Disk Capacity Online: Using OCE (Supported by RAIDXpert2 Plus)
- 3.6 Migrating RAID Levels Online: Using ORLM (Supported by RAIDXpert2 Plus)
- 3.7 Array Tasks: Starting and Stopping Tasks
- 3.8 Understanding Disks
- 3.9 Rescanning Disks for Changes in State
- 3.10 Sparing Options: Disks and Arrays
- 3.11 Dedicated Sparing
- 3.12 Global Sparing
- 3.13 RAID Performance Considerations
- 3.14 RAID Reliability Considerations
- 3.15 Flexibility and Expansion Considerations
- 3.16 Multiple RAID Levels
- 3.17 RAIDABLE Arrays
- Chapter 4 BIOS Configuration Utility
- 4.1 When to Use the AMD-RAID Controller BIOS Configuration Utility
- 4.2 Access the AMD-RAID Controller BIOS Configuration Utility
- 4.3 Understanding the Color Code in the BIOS Configuration Utility
- 4.4 Initialize Disks
- 4.5 Create Arrays
- 4.6 Delete Arrays
- 4.7 Swap Arrays
- 4.8 Manage Spares
- 4.9 View Disk Details
- 4.10 View Array Details
- 4.11 Rescan All Channels
- 4.12 Change the Controller Options
- 4.13 Continue Booting from the BIOS Configuration Utility
- Chapter 5 Software Installation
- 5.1 System Setup Process Overview
- 5.2 Before You Begin
- 5.3 Copying AMD-RAID Drivers to Removable Storage
- 5.4 Pre-installation steps
- 5.5 Installing AMD-RAID drivers
- 5.5.1 Installing AMD-RAID Drivers while Installing Microsoft® Windows®
- 5.5.2 Installing AMD-RAID Drivers While Installing Linux® Operating System
- 5.5.2.1 Installing the AMD-RAID BIOS Drivers During a Red Hat Enterprise Linux® 7.2 64 bit (RHEL) Installation
- 5.5.2.2 Installing the AMD-RAID BIOS Drivers during a Supported Ubuntu Desktop Installation
- 5.5.2.3 Install the AMD-RAID UEFI Drivers during a RHEL 7.2 64 bit Linux® Installation
- 5.5.2.4 Installing the AMD-RAID UEFI Drivers during a Supported Ubuntu Desktop Installation
- 5.6 Installing the AMD RAIDXpert2 Management Suite for Microsoft® Windows®
- 5.7 Installing the AMD RAIDXpert2 Management Suite for Linux®
- 5.8 Installing the AMD RAIDXpert2 Graphical User Interface (GUI)
- Chapter 6 AMD RAIDXpert2 Graphical User Interface (GUI)
- 6.1 Start RAIDXpert2
- 6.2 Password Protection
- 6.3 Help and About Windows®
- 6.4 Reviewing the RAIDXpert2 GUI
- 6.5 Working with Disks
- 6.6 Working with Arrays
- 6.6.1 Create and Format Arrays
- 6.6.2 Name Arrays
- 6.6.3 Transform Arrays (Supported by RAIDXpert2 Plus)
- 6.6.4 Restore (Rebuild) Arrays
- 6.6.5 Prepare to Physically Remove an Array
- 6.6.6 Delete Arrays
- 6.6.7 Change Cache Settings for Arrays
- 6.6.8 Change the Priority Level of a Task
- 6.6.9 Interrupt, Cancel, or Resume a Task
- 6.6.10 Check for Consistency
- 6.6.11 Schedule a Consistency Check
- 6.6.12 Scan an Array in the Background
- 6.6.13 Add or Remove Dedicated Spares
- 6.6.14 Add or Remove Global Spares
- 6.6.15 Hide an Array
- 6.6.16 Secure Erase
- 6.7 Working with Views
- 6.8 Working with Options
- 6.9 Add Space Using a RAIDABLE Array
- Chapter 7 Troubleshooting
- Chapter 8 Software License: EULA
- Chapter 9 rcadm Command Line Interface Tool
- Appendix A rcadm.efi Information

AMD-RAIDXpert2 User Guide
53987 Rev. 3.01 June 2016
62
AMD RAIDXpert2 Graphical User Interface (GUI)
Chapter 6
For each active RAIDXpert2 session an identifier is stored in the browser. Depending on how
your browser treats this session identifier, you might be able to run multiple independent
sessions simultaneously. Internet Explorer can run separate RAIDXpert2 sessions if you select
File > New Session. If you do not select a new session, all instances of Internet Explorer share
the same session.
End a RAIDXpert2 session by selecting Options > Logout. Do not simply close the browser
window.
6.1.2 Desktop Shortcut Access
6.1.2.1 Signing In Using the RAIDXpert2 Desktop Shortcut
1. Launch the AMD RAIDXpert2 Management Tool using by double-clicking the RAIDXpert2
desktop shortcut..
2. The AMD RAIDXpert2 Management Tool Login is displayed. If the Login page does not
display, verify that you have used the correct shortcut.
3. Select a language at the drop-down menu.
4. On the Login page, enter the name and password of a configured user. The default user name
and password are admin and admin.
Note: Both usernames and passwords are case-sensitive.
5. Click Submit. If the system is available, the RAIDXpert2 GUI page is displayed; otherwise,
a message indicates that the system is unavailable.
6.2 Password Protection
When the system displays a window that prompts you to choose a username and password, use the
procedure below.
1. In the Username field, enter the new username.
2. In the Password field, enter the new password. Follow the guidelines in Section 6.2.1, Things
to Know About Passwords, on page 62.
3. In the Confirm New Password field, re-enter the new password.
Note: Both usernames and passwords are case-sensitive.
4. Click Submit.
6.2.1 Things to Know About Passwords
RAIDXpert2 cannot be opened without a password. Create a password that is easily
remembered.
The password must be 4 - 20 characters long.
The password is case-sensitive.
The application does not track previous passwords unless enabled through your web browser.