User Guide

AMD-RAIDXpert2 User Guide
53987 Rev. 3.01 June 2016
58
Software Installation
Chapter 5
5.7 Installing the AMD RAIDXpert2 Management Suite
for Linux
®
Obtain the AMD RAIDXpert2 Management Suite executable file (Setup.sh) from your system
supplier or motherboard vendor. Download the Setup.sh file to the system’s desktop.
Table 15. Linux
®
Procedure for Installing the Management Suite
Element
Action
RHEL 7.2 64 bit
Manually load the following i686 rpms - libX11, libXau, libXcb, libXext,
libXi, libXtst, compat-libstdc++, gtk2, libSM, libpng12, adwaita-gtk2-
theme, libcanberra-gtk2 and PackageKit-gtk3-module.
Ubuntu 15.04 and 15.10,
32-bit operating systems
only
For Ubuntu 15.04 and 15.10, 32-bit operating systems, enter the following
command before executing Setup.sh:
sudo ln -s /lib/i386-linux-gnu/libc.so.6
/lib/libc.so.6
Ubuntu 15.04 and 15.10,
64-bit operating systems
only
For the Ubuntu 15.04 and 15.10, 64-bit operating systems, type the
following commands before executing Setup.sh, pressing Enter after
each one:
sudo ln -s /lib/x86_64-linux-gnu/libc.so.6
/lib/libc.so.6
sudo apt-get install lib32z1
sudo apt-get install lib32ncurses5
sudo apt-get install libxext6:i386
sudo apt-get install libxtst6:i386
sudo apt-get install libxi6:i386
sudo apt-get install libstdc++6:i386
sudo apt-get install libgtk2.0-0:i386
sudo apt-get install libxxf86vml:i386
sudo apt-get install libsm6:i386
sudo apt-get install gtk2-engines-murrine:i386
sudo apt-get install libcanberra-gtk-module:i386
Setup.sh
Verify that the Setup.sh file is executable by right-clicking on the
Setup.sh file on the system’s desktop.
From the pop-up menu, select the Properties category.
Click the Permissions tab.