User Guide

AMD-RAIDXpert2 User Guide
53987 Rev. 3.01 June 2016
50
Software Installation
Chapter 5
 Enter valid entries.
 Click Save.
 In the upper left corner, click Done.
12. In the bottom right corner, click Begin Installation.
13. At the Configuration window, do the following:
a. Click Root Password:
 Enter an applicable root password.
 Re-enter the root password.
 In the upper right corner, click Done.
b. Click User Creation:
 Enter a Full Name.
 Enter a Username.
 Enter an applicable password.
 Re-enter the user password.
 In the upper right corner, click Done.
14. When the Installation Complete message displays, do the following:
a. In the bottom right corner, click Reboot.
b. Eject and remove the USB flash drive and the installation media.
15. At the Initial Setup of Red Hat Enterprise Linux Server 7.2, do the following:
a. Press 1, then press Enter.
b. Press 2, then press Enter.
c. Press R, then press Enter.
d. Press the C key, then press Enter.
16. Login to the system and do the following:
a. Select a user.
b. Enter a password.
17. At the Welcome window, select the desired language, then click Next
18. At the Select Input Sources Window, select the desired Input Source, then click Next.
19. If desired, Configure Online Accounts, then click Next.
20. Click Start using Red Hat Enterprise Linux Server.
21. For RHEL 7.2 64 bit installs, manually load the following el7.686 rpms.
a. Allow the system to boot and login as root when prompted.
b. Insert the RHEL 7.2 x 64 installation CD/DVD into the system.
c. Install the following rpms:
 libX11…el7.i686
 libXau…el7.i686
 libxcb…el7.i686