User Guide
Table Of Contents
- AMD -RAIDXpert2 User Guide
- Contents
- List of Tables
- Revision History
- Preface
- Chapter 1 Safety Precautions
- Chapter 2 Getting Started
- Chapter 3 Arrays, Disks and RAID Levels
- 3.1 Understanding Arrays
- 3.2 RAID Levels
- 3.3 Array States
- 3.4 Creating Arrays: Future Expansion
- 3.5 Expanding Disk Capacity Online: Using OCE (Supported by RAIDXpert2 Plus)
- 3.6 Migrating RAID Levels Online: Using ORLM (Supported by RAIDXpert2 Plus)
- 3.7 Array Tasks: Starting and Stopping Tasks
- 3.8 Understanding Disks
- 3.9 Rescanning Disks for Changes in State
- 3.10 Sparing Options: Disks and Arrays
- 3.11 Dedicated Sparing
- 3.12 Global Sparing
- 3.13 RAID Performance Considerations
- 3.14 RAID Reliability Considerations
- 3.15 Flexibility and Expansion Considerations
- 3.16 Multiple RAID Levels
- 3.17 RAIDABLE Arrays
- Chapter 4 BIOS Configuration Utility
- 4.1 When to Use the AMD-RAID Controller BIOS Configuration Utility
- 4.2 Access the AMD-RAID Controller BIOS Configuration Utility
- 4.3 Understanding the Color Code in the BIOS Configuration Utility
- 4.4 Initialize Disks
- 4.5 Create Arrays
- 4.6 Delete Arrays
- 4.7 Swap Arrays
- 4.8 Manage Spares
- 4.9 View Disk Details
- 4.10 View Array Details
- 4.11 Rescan All Channels
- 4.12 Change the Controller Options
- 4.13 Continue Booting from the BIOS Configuration Utility
- Chapter 5 Software Installation
- 5.1 System Setup Process Overview
- 5.2 Before You Begin
- 5.3 Copying AMD-RAID Drivers to Removable Storage
- 5.4 Pre-installation steps
- 5.5 Installing AMD-RAID drivers
- 5.5.1 Installing AMD-RAID Drivers while Installing Microsoft® Windows®
- 5.5.2 Installing AMD-RAID Drivers While Installing Linux® Operating System
- 5.5.2.1 Installing the AMD-RAID BIOS Drivers During a Red Hat Enterprise Linux® 7.2 64 bit (RHEL) Installation
- 5.5.2.2 Installing the AMD-RAID BIOS Drivers during a Supported Ubuntu Desktop Installation
- 5.5.2.3 Install the AMD-RAID UEFI Drivers during a RHEL 7.2 64 bit Linux® Installation
- 5.5.2.4 Installing the AMD-RAID UEFI Drivers during a Supported Ubuntu Desktop Installation
- 5.6 Installing the AMD RAIDXpert2 Management Suite for Microsoft® Windows®
- 5.7 Installing the AMD RAIDXpert2 Management Suite for Linux®
- 5.8 Installing the AMD RAIDXpert2 Graphical User Interface (GUI)
- Chapter 6 AMD RAIDXpert2 Graphical User Interface (GUI)
- 6.1 Start RAIDXpert2
- 6.2 Password Protection
- 6.3 Help and About Windows®
- 6.4 Reviewing the RAIDXpert2 GUI
- 6.5 Working with Disks
- 6.6 Working with Arrays
- 6.6.1 Create and Format Arrays
- 6.6.2 Name Arrays
- 6.6.3 Transform Arrays (Supported by RAIDXpert2 Plus)
- 6.6.4 Restore (Rebuild) Arrays
- 6.6.5 Prepare to Physically Remove an Array
- 6.6.6 Delete Arrays
- 6.6.7 Change Cache Settings for Arrays
- 6.6.8 Change the Priority Level of a Task
- 6.6.9 Interrupt, Cancel, or Resume a Task
- 6.6.10 Check for Consistency
- 6.6.11 Schedule a Consistency Check
- 6.6.12 Scan an Array in the Background
- 6.6.13 Add or Remove Dedicated Spares
- 6.6.14 Add or Remove Global Spares
- 6.6.15 Hide an Array
- 6.6.16 Secure Erase
- 6.7 Working with Views
- 6.8 Working with Options
- 6.9 Add Space Using a RAIDABLE Array
- Chapter 7 Troubleshooting
- Chapter 8 Software License: EULA
- Chapter 9 rcadm Command Line Interface Tool
- Appendix A rcadm.efi Information
53987 Rev. 3.01 June 2016
AMD-RAIDXpert2 User Guide
Chapter 5
Software Installation
49
5. At the Red Hat Enterprise Linux welcome window, do the following:
a. Press the Up arrow, then select Install Red Hat Enterprise Linux 7.2.
b. Press Tab.
c. Type modprobe.blacklist=ahci inst.dd nomodeset at the end of the existing string then
press Enter. For example, vmlinux initrd.img……..quiet modprobe.blacklist=ahci
inst.dd nomodeset
6. At the Driver Disk Device Selection, press 1 (the number of the flash drive), then press
Enter.
7. At the Choose Driver Disk ISO file, press 1 (the number of the dd-rcraid-
RHEL….el7.2x86_64.iso entry), then press Enter.
8. At Select Drivers to Install, do the following:
a. Press 1 (the number of the /media/DD/…..x86_64.rpm entry), then press Enter. The
/media/DD/… is selected and should look like [X] /media/DD/……x86_64.rpm.
b. Press the C key, then press Enter.
9. At the Driver Disk Device Selection, press the C key, then press Enter.
10. At the Welcome to Red Hat Enterprise Linux Screen, do the following:
a. Choose the desired Language and Country.
b. In the bottom right corner, then click Continue.
11. At the Installation Summary Screen:
a. Under Localization, configure the following:
Date and Time
Keyboard
Language Support
b. Under Software, configure the following:
Installation Source
Software Selection
Under Base Environments, select Server with GUI.
Under Add-Ons for Selected Environments, select Compatibility Library.
In the upper left corner, click Done.
c. Under System, configure the following:
Installation Destination
Under Local Standard Disks, select AMD-RAID Array.
In the upper left corner, click Done.
Network and Hostname
In the bottom left corner, enter a valid Hostname.
Select an Ethernet Port.
In the bottom right corner, click Configure.