User Guide
Table Of Contents
- AMD -RAIDXpert2 User Guide
- Contents
- List of Tables
- Revision History
- Preface
- Chapter 1 Safety Precautions
- Chapter 2 Getting Started
- Chapter 3 Arrays, Disks and RAID Levels
- 3.1 Understanding Arrays
- 3.2 RAID Levels
- 3.3 Array States
- 3.4 Creating Arrays: Future Expansion
- 3.5 Expanding Disk Capacity Online: Using OCE (Supported by RAIDXpert2 Plus)
- 3.6 Migrating RAID Levels Online: Using ORLM (Supported by RAIDXpert2 Plus)
- 3.7 Array Tasks: Starting and Stopping Tasks
- 3.8 Understanding Disks
- 3.9 Rescanning Disks for Changes in State
- 3.10 Sparing Options: Disks and Arrays
- 3.11 Dedicated Sparing
- 3.12 Global Sparing
- 3.13 RAID Performance Considerations
- 3.14 RAID Reliability Considerations
- 3.15 Flexibility and Expansion Considerations
- 3.16 Multiple RAID Levels
- 3.17 RAIDABLE Arrays
- Chapter 4 BIOS Configuration Utility
- 4.1 When to Use the AMD-RAID Controller BIOS Configuration Utility
- 4.2 Access the AMD-RAID Controller BIOS Configuration Utility
- 4.3 Understanding the Color Code in the BIOS Configuration Utility
- 4.4 Initialize Disks
- 4.5 Create Arrays
- 4.6 Delete Arrays
- 4.7 Swap Arrays
- 4.8 Manage Spares
- 4.9 View Disk Details
- 4.10 View Array Details
- 4.11 Rescan All Channels
- 4.12 Change the Controller Options
- 4.13 Continue Booting from the BIOS Configuration Utility
- Chapter 5 Software Installation
- 5.1 System Setup Process Overview
- 5.2 Before You Begin
- 5.3 Copying AMD-RAID Drivers to Removable Storage
- 5.4 Pre-installation steps
- 5.5 Installing AMD-RAID drivers
- 5.5.1 Installing AMD-RAID Drivers while Installing Microsoft® Windows®
- 5.5.2 Installing AMD-RAID Drivers While Installing Linux® Operating System
- 5.5.2.1 Installing the AMD-RAID BIOS Drivers During a Red Hat Enterprise Linux® 7.2 64 bit (RHEL) Installation
- 5.5.2.2 Installing the AMD-RAID BIOS Drivers during a Supported Ubuntu Desktop Installation
- 5.5.2.3 Install the AMD-RAID UEFI Drivers during a RHEL 7.2 64 bit Linux® Installation
- 5.5.2.4 Installing the AMD-RAID UEFI Drivers during a Supported Ubuntu Desktop Installation
- 5.6 Installing the AMD RAIDXpert2 Management Suite for Microsoft® Windows®
- 5.7 Installing the AMD RAIDXpert2 Management Suite for Linux®
- 5.8 Installing the AMD RAIDXpert2 Graphical User Interface (GUI)
- Chapter 6 AMD RAIDXpert2 Graphical User Interface (GUI)
- 6.1 Start RAIDXpert2
- 6.2 Password Protection
- 6.3 Help and About Windows®
- 6.4 Reviewing the RAIDXpert2 GUI
- 6.5 Working with Disks
- 6.6 Working with Arrays
- 6.6.1 Create and Format Arrays
- 6.6.2 Name Arrays
- 6.6.3 Transform Arrays (Supported by RAIDXpert2 Plus)
- 6.6.4 Restore (Rebuild) Arrays
- 6.6.5 Prepare to Physically Remove an Array
- 6.6.6 Delete Arrays
- 6.6.7 Change Cache Settings for Arrays
- 6.6.8 Change the Priority Level of a Task
- 6.6.9 Interrupt, Cancel, or Resume a Task
- 6.6.10 Check for Consistency
- 6.6.11 Schedule a Consistency Check
- 6.6.12 Scan an Array in the Background
- 6.6.13 Add or Remove Dedicated Spares
- 6.6.14 Add or Remove Global Spares
- 6.6.15 Hide an Array
- 6.6.16 Secure Erase
- 6.7 Working with Views
- 6.8 Working with Options
- 6.9 Add Space Using a RAIDABLE Array
- Chapter 7 Troubleshooting
- Chapter 8 Software License: EULA
- Chapter 9 rcadm Command Line Interface Tool
- Appendix A rcadm.efi Information
53987 Rev. 3.01 June 2016
AMD-RAIDXpert2 User Guide
Chapter 5
Software Installation
43
Chapter 5 Software Installation
This Installation Guide is designed to assist you with system setup, by performing these general
procedures:
5.1 System Setup Process Overview
A generic system setup process follows these steps:
1. Copy the AMD-RAID drivers to a removable storage medium.
CAUTION: Install the device drivers and applications on a system at the same time that the
Windows or Linux operating system is installed.
2. Power on the system.
3. Access the platform BIOS setup for the system. For supported AMD chipsets, set the SATA
mode as RAID. (This enables the loading of the AMD-RAID Option-ROM).
4. Initialize the disks using the AMD-RAID Array Configuration Utility.
5. Create arrays using the AMD-RAID Array Configuration Utility.
6. Install the AMD-RAID drivers on the system.
7. Load the operating system.
8. Install the OS RAID Management Suite (AMD RAIDXpert2) on the system.
Note: To protect your data, always perform a backup prior to installing any new, major hardware
or software.
5.2 Before You Begin
Have the Windows
®
or Linux
®
operating system software available and ready to install.
5.3 Copying AMD-RAID Drivers to Removable Storage
You need to copy the drivers to a removable storage medium before you begin the installation.
5.3.1 Copying AMD-RAID Drivers in a Microsoft
®
Windows
®
Environment
1. Power on the system.
2. Locate and use a system that is running a Windows operating system and has a CD DVD
drive or an I/O port for removable storage media (such as a USB flash drive).
3. Go to a browser and access the web site of your system supplier or motherboard vendor.
4. Insert the storage medium into the system: