User Guide
Table Of Contents
- AMD -RAIDXpert2 User Guide
- Contents
- List of Tables
- Revision History
- Preface
- Chapter 1 Safety Precautions
- Chapter 2 Getting Started
- Chapter 3 Arrays, Disks and RAID Levels
- 3.1 Understanding Arrays
- 3.2 RAID Levels
- 3.3 Array States
- 3.4 Creating Arrays: Future Expansion
- 3.5 Expanding Disk Capacity Online: Using OCE (Supported by RAIDXpert2 Plus)
- 3.6 Migrating RAID Levels Online: Using ORLM (Supported by RAIDXpert2 Plus)
- 3.7 Array Tasks: Starting and Stopping Tasks
- 3.8 Understanding Disks
- 3.9 Rescanning Disks for Changes in State
- 3.10 Sparing Options: Disks and Arrays
- 3.11 Dedicated Sparing
- 3.12 Global Sparing
- 3.13 RAID Performance Considerations
- 3.14 RAID Reliability Considerations
- 3.15 Flexibility and Expansion Considerations
- 3.16 Multiple RAID Levels
- 3.17 RAIDABLE Arrays
- Chapter 4 BIOS Configuration Utility
- 4.1 When to Use the AMD-RAID Controller BIOS Configuration Utility
- 4.2 Access the AMD-RAID Controller BIOS Configuration Utility
- 4.3 Understanding the Color Code in the BIOS Configuration Utility
- 4.4 Initialize Disks
- 4.5 Create Arrays
- 4.6 Delete Arrays
- 4.7 Swap Arrays
- 4.8 Manage Spares
- 4.9 View Disk Details
- 4.10 View Array Details
- 4.11 Rescan All Channels
- 4.12 Change the Controller Options
- 4.13 Continue Booting from the BIOS Configuration Utility
- Chapter 5 Software Installation
- 5.1 System Setup Process Overview
- 5.2 Before You Begin
- 5.3 Copying AMD-RAID Drivers to Removable Storage
- 5.4 Pre-installation steps
- 5.5 Installing AMD-RAID drivers
- 5.5.1 Installing AMD-RAID Drivers while Installing Microsoft® Windows®
- 5.5.2 Installing AMD-RAID Drivers While Installing Linux® Operating System
- 5.5.2.1 Installing the AMD-RAID BIOS Drivers During a Red Hat Enterprise Linux® 7.2 64 bit (RHEL) Installation
- 5.5.2.2 Installing the AMD-RAID BIOS Drivers during a Supported Ubuntu Desktop Installation
- 5.5.2.3 Install the AMD-RAID UEFI Drivers during a RHEL 7.2 64 bit Linux® Installation
- 5.5.2.4 Installing the AMD-RAID UEFI Drivers during a Supported Ubuntu Desktop Installation
- 5.6 Installing the AMD RAIDXpert2 Management Suite for Microsoft® Windows®
- 5.7 Installing the AMD RAIDXpert2 Management Suite for Linux®
- 5.8 Installing the AMD RAIDXpert2 Graphical User Interface (GUI)
- Chapter 6 AMD RAIDXpert2 Graphical User Interface (GUI)
- 6.1 Start RAIDXpert2
- 6.2 Password Protection
- 6.3 Help and About Windows®
- 6.4 Reviewing the RAIDXpert2 GUI
- 6.5 Working with Disks
- 6.6 Working with Arrays
- 6.6.1 Create and Format Arrays
- 6.6.2 Name Arrays
- 6.6.3 Transform Arrays (Supported by RAIDXpert2 Plus)
- 6.6.4 Restore (Rebuild) Arrays
- 6.6.5 Prepare to Physically Remove an Array
- 6.6.6 Delete Arrays
- 6.6.7 Change Cache Settings for Arrays
- 6.6.8 Change the Priority Level of a Task
- 6.6.9 Interrupt, Cancel, or Resume a Task
- 6.6.10 Check for Consistency
- 6.6.11 Schedule a Consistency Check
- 6.6.12 Scan an Array in the Background
- 6.6.13 Add or Remove Dedicated Spares
- 6.6.14 Add or Remove Global Spares
- 6.6.15 Hide an Array
- 6.6.16 Secure Erase
- 6.7 Working with Views
- 6.8 Working with Options
- 6.9 Add Space Using a RAIDABLE Array
- Chapter 7 Troubleshooting
- Chapter 8 Software License: EULA
- Chapter 9 rcadm Command Line Interface Tool
- Appendix A rcadm.efi Information
53987 Rev. 3.01 June 2016
AMD-RAIDXpert2 User Guide
Chapter 4
BIOS Configuration Utility
35
4.2 Access the AMD-RAID Controller BIOS
Configuration Utility
When booting the system, press Ctrl + R when the BIOS banner displays. There is a maximum of
three seconds to use this key combination to enter the BIOS Configuration Utility.
Note: If the BIOS Configuration Utility does not display, contact your system or motherboard
supplier.
4.3 Understanding the Color Code in the BIOS
Configuration Utility
Color codes indicate the type or status of information at the BIOS Configuration Utility. See Table
14.
Table 14. BIOS Configuration Utility Color Codes
Color
Description
White text
Indicates an available option or informational text.
Black text, yellow
highlighting
Indicates an option or device for which action might be taken.
Yellow text
Indicates information about the yellow-highlighted option.
Green text
Indicates an item that has been selected.
Light blue text
Indicates that the item cannot be selected.
Magenta text
Indicates items that are related to spares.
Red text
Indicates a failed virtual or physical disk or a warning. For example,
informational text might be red if an option is not available.
4.4 Initialize Disks
New disks and legacy disks must be initialized before they can be used to create an AMD-RAID
array.
Initialization writes AMD-RAID configuration information (metadata) to a disk.