User Guide

53987 Rev. 3.01 June 2016
AMD-RAIDXpert2 User Guide
Chapter 9
rcadm Command Line Interface Tool
103
9.2.4 rcadm Array List Elements
Table 42. rcadm Array List Elements
Element
Description
A
Array number assigned by RAIDXpert2
Type
RAID type.
O.S. Name
Name assigned by the operating system to the array. The name shows as
“Hidden” if the array is hidden from the operating system. The name
shows “??” if the array is Offline.
Sys or System Device
Indicates whether or not the array is being used as a system disk under
Windows
State
State of the array (Normal, Critical, Offline)
Size or Capacity
Total size of the disk:
 1 MB = 1,000,000 bytes
 1 GB = 1,000,000,000 bytes
Note: Because the ATA storage industry has standardized the meanings of
MB as 1,000,000 bytes and GB as 1,000,000,000 bytes, RAIDXpert2
reports the same units.
Hide
Whether the array is hidden from the operating system
Id
Globally unique identifier for the array assigned by RAIDXpert2
Task
Task type (Transform, Check, Check_Bitmap, Not_Active, Create,
Restore)
Note: See Section 3.7, Array Tasks: Starting and Stopping Tasks, on page
28 for detailed definitions.
Task State
The state of the task (Started, Paused, Completed)
%
The progress of a current array task, such as a Create or Transform, shown
as percent complete
CA
Current array cache setting (NC=No Cache, R=Read Cache, W=Write Back
Cache, RW=Read + Write Back Cache).