User Manual

ASUS A7V266-E User’s Manual 15
3. HARDWARE SETUP
3. HARDWARE SETUP
3.2 Layout Contents
Motherboard Settings
1) JEN p. 18 JumperFree Mode Setting (Disable / Enable)
2) DIP_SW p. 19 CPU External Frequency Selection (Switches 1–4)
3) DSW p. 20 Manual CPU Ratio Settings (Switches 1-5)
4) PALO_FREQ p. 20 FID setting (FID0-3)
5) JP1, JP2 p. 20 I/O Voltage Settings (2.5V/2.65V/2.75V/2.8V)
6) VID1, 2, 3, 4 p. 21 Voltage Regulator Output Volt. Setting (1.675V-1.85 V)
7) CENTER/BASS, p. 21 Bass Center Setting (Type 1 or Type 2)
BASS/CENTER
8) KBWK p. 22 Keyboard Power Up (Enable / Disable)
9) ACRUSB1, ACRUSB2 p. 22 ACR/USB Selection (USB to Conn. / USB on ACR)
10) USB01, 23, 45_PWR p. 23 Three USB Device Wake-ups (+5V / +5VSB)
11) JP2601 p. 23 IDE Channel Setting (ATA100 or RAID 1/0)
12) CLR_RTC p. 24 Clear RTC RAM (2 pin contact)
13) THEMCPU p. 24 Thermal Sensor CPU Setting (Athlon-Duron / Reserved)
Expansion Slots/Sockets
1) DIMM 1/2/3 p. 25 System Memory Support
2) Socket 462 p. 27 CPU Support
3) PCI 1/2/3/4/5 p. 28 32-bit PCI Bus Expansion Slots
4) AGP Pro p. 30 Accelerated Graphics Port Slot
5) ACR Slot p. 30 Advanced Communication Riser Slot
Connectors
1) PS2KBMS p. 31 PS/2 Mouse Port (6 pin female)
2) PS2KBMS p. 31 PS/2 Keyboard Port (6 pin female)
3) USB p. 32 Universal Serial Bus Ports 1 & 2 (Two 4 pin female)
4) PRINTER p. 32 Parallel Port (25 pin female)
5) COM1/COM2 p. 32 Serial Ports (9 pin /10-1 pin male)
6) GAME_AUDIO p. 33 Game/MIDI Port (15-pin female) (optional)
7) AUDIO p. 33 Audio Connectors (Three 1/8” AUDIO) (optional)
8) IDELED p. 34 IDE Activity LED (2 pin)
9) FLOPPY p. 34 Floppy Disk Drive Connector (34 pin)
10) PRIMARY / SEC. IDE p. 35 IDE Connectors (Two 40-1 pin)
11) CPU/PWR/CHA_FAN p. 36 CPU, Power, and Chassis Fan Connectors (Three 3 pin)
12) USB2_3 / USB4_5 p. 36 USB Headers (10-1 pin)
13) IR_CON p. 37 Standard Infrared Module Connector (10-1 pin)
14) AFPANEL p. 37 ASUS iPanel Connector (12-1 pin)
15) ATXPWR p. 38 ATX Power Supply Connector (20 pin)
Layout Contents
3. H/W SETUP