Owner manual

18
ASUS A7N266-C User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
A7N266-C
0 10 10 1
®
A7N266-C Jumper Mode Setting
JEN
Enable
(Default)
23
Disable
12
2) Jumperfree Setting (JEN)
Normally, all changes to frequency settings can be made through BIOS
immediately upon starting up the computer. Therefore, the default setting for
this jumper, [2-3] enables easy BIOS adjustments. If the BSEL jumpers are
used, it is necessary to set this JEN jumper to [1-2].
A7N266-C
0 10 10 1
®
A7N266-C Onboard LED
PLED
WARNING
ON
Incorrect
AGP Card
OFF
Correct
AGP Card
ON
Standby
Power
OFF
Powered
Off
1) Onboard System Indicators (LED - Light Emitting Diodes)
The GREEN onboard LED indicates that the system power is okay. This light
also lights when the PC is in suspend or soft-off mode. The RED onboard warning
LED lights up only if the wrong type of AGP card is connected to the board:
(See AGP Pro, p. 28)