Computer Hardware User Manual

20
ASUS A7A266-E User’s Manual
3. HARDWARE SETUP
5) Manual CPU Ratio Settings (DSW Switches 6-9)
Set DSW switches (6-9) to use the clock multiplier to coordinate the ratio of bus
speeds with CPU settings. Set the DSW switches according to the internal speed
of your processor and the bus frequency (133/100MHz).
IMPORTANT:
1. To use this feature, JEN must be set to Jumper Mode, [1-2].
(See 1, JumperFree™ Mode (JEN) in 3, HARDWARE SETUP.)
2. Ensure the DSWsettings are set to enable manual switch adjustments:
DSW switch 10 is OFF to disable the manual CPU ratio settings.
DSW switch 10 is ON, for all manual CPU ratio settings.
0 10 1
A7A266-E
A7A266-E CPU External
Clock (BUS) Frequency
Selection
DSW
ON
12345 678910
ON
12345 678910
ON
12345 678910
ON
12345 678910
5.0x 5.5x 6.0x 6.5x
ON
12345 678910
ON
12345 678910
7.0x 7.5x
ON
12345 678910
ON
12345 678910
8.0x 8.5x
ON
12345 678910
ON
12345 678910
ON
12345 678910
ON
12345 678910
ON
12345 678910
ON
12345 678910
ON
12345 678910
9.0x 9.5x 10.0x 10.5x
ON
12345 678910
ON
12345 678910
ON
12345 678910
ON
12345 678910
11.0x 11.5x 12.0x >=12.5x
0 10 1
A7A266-E
A7A266-E CPU Ratio Default
ON
12345 678910
ON
12345 678910
Disable
settings
(Default)
Enable
settings
DSW
OFF
ON
3. Set DSW switches 6 through 9 as follows according to the desired multiplier: