User Guide

72
4. Using the Notebook PC
Plug & Play O/S [Yes]
This field gives operating system information to the BIOS so that plug and play information can be set
accordingly. The default assumes that your operating system is plug and play compliant such as MS
Windows 98/ME/2000. The configuration options are: [No] [Yes].
>I/O Device Configuration (described later)
Pressing [Enter] when this field is highlighted calls up a sub-menu for configuring the Notebook PC’s
serial and parallel ports. See the Advanced sub-menu for descriptions of each sub-menu items.
TV Display Type [NTSC]
This sets the video synchronization mode for your video output device (television or video projector).
The setting depends on the territory that your video output device is manufactured for. The configura-
tion options are: [NTSC] [PAL]
Japanese Mode [No]
This sets the video synchronization mode for your video output device (television or video projector)
for video devices designed for Japanese territories using standards such as J-NTSC. The configuration
options are: [No] [Yes]
Advanced Menu
Selecting Advanced from the main menu bar display the Advanced menu as shown below.
Item Specific Help
Plug & Play O/S [Yes]
I/O Device Configuration
TV Display Type [NTSC]
Japanese Mode [No]
Boot Up NumLock Status [On]
Floppy 3 Mode Support [Disabled]
Quick Power On Self Test [Enabled]
Select ‘Yes’ if you are
using Plug & Play
capable operating
system.
Select ‘No’ if you need
the BIOS to configure
non-bootable devices.