User Guide

Fast IR Driver

Installing the Fast IR Driver for Windows ME & 2000

If your IR port is not enabled, clicking on Fast IR Driver on the support CD will give you a readme file on

enabling the IR port.

Enabling the IR port

1. Enter BIOS Setup Utility during bootup.

2. Enter the Advanced menu and select the sub-menu I/O Device Configuration

3. Set IR Port to [2E8H/IRQ3] or [2F8H/IRQ3] (the other two settings will conflict with serial port A)

4. Windows will install IR networking and IR serial port drivers. Answer Yes to restart your computer.

Setting the IR port

Insert the support CD and click Fast IR Driver on the autorun menu to make the setting as shown by the

dialog box.

Item Specific Help

I/O Device Configuration

Serial Port A [3F8H/IRQ4]

IR Port [Disabled]

Mode: [FIR]

DMA Channel: [1]

Parallel Port [378H/IRQ7]

Mode: [ECP+EPP]

DMA Channel: [3]

<Enter> to select the

I/O Address & IRQ for

COM1.

(1) Click No so that you can install other drivers.

Clicking Yes will automatically restart your com-

puter.