User Manual

Page 13 of 40
Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F2101012
AUDIX GROUP
4.2. Method of Exercising EUT
The methods for exercising the EUT during the measurement specified in ANSI
C63.4-2014 clause 11.2, 11.3 and figure 16 were used.
EUT Exercise Program and Condition
Operating System
Windows 10
Test Program
“Burn in test (V8.1)”
Graphic Controller
The EUT (inside PC System) drives test software
“Burn in test (V8.1)”, to send “H” characters (Size: 11)
to the LCD monitor, and then the LCD monitor
displays “H” pattern (CPU + RAM + 2D + 3D 100%).
Audio Controller
Run the program “Windows Media Player” and play
1kHz audio signal.
LAN Controller (10Mbps)
Data transfer to host PC (ping test)
LAN Controller
(100Mbps&1Gbps&2.5Gbps)
Data transfer to host PC (tfgen.exe.)
One USB 3.0 Port
An executive program, “WINTHRAX.EXE” was
executed to read and write data from USB 3.0 HDD.
One USB 2.0 Port
An executive program, “WINTHRAX.EXE” was
executed to read and write data from USB 2.0 HDD.
Other USB Port
Select other USB 3.0&2.0 ports to connect to USB
3.0&2.0 HDD, with “WINTHRAX.EXE” to do reading.
One Type-C Port
An executive program, “WINTHRAX.EXE” was
executed to read and write data from USB 3.0 HDD.
Walkman
The walkman sends 1kHz audio signal to the EUT
(inside PC System).