User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 CPU Configuration
- 6.2 Platform Misc Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 CPU Storage Configuration
- 6.7 Onboard Devices Configuration
- 6.8 APM Configuration
- 6.9 USB Configuration
- 6.10 HDD/SSD SMART Information
- 6.11 NVMe Configuration
- 6.12 PCH-FW Configuration
- 6.13 Network Stack Configuration
- 6.14 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX X299-E Gaming BIOS Manual
67
The following items appear only when Extension Fan Profile 1-6 is set to [Manual].
Extension Fan 1-6 Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the extension fan
temperature. The extension fan will operate at the maximum duty cycle
when the temperature source is higher than the limit. Once the extension
fan temperature reaches 75 degrees, fan will run up to full speed.
Extension Fan 1-6 Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum extension fan duty cycle.
When the temperature source reaches the upper limit, the extension
fan will operate at the maximum duty cycle. Once the extension fan
temperature reaches 75 degrees, fan will run up to full speed.
Extension Fan 1-6 Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the extension fan
temperature.
Extension Fan 1-6 Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the extension fan middle duty cycle.
Extension Fan 1-6 Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the extension fan
temperature. The extension fan will operate at the minimum duty cycle
when the temperature source is lower than 40 degrees.
Extension Fan 1-6 Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum extension fan duty cycle.
When the temperature source is lower than 40 degrees, the extension fan
will operate at the minimum duty cycle.
Heatsink Fan(s) Configuration
Heatsink Fan Q-Fan Control
[PWM Mode] Enables the Heatsink Q-Fan Control feature in PWM mode for
4-pin Heatsink Fan.
[Disabled] Disables the Q-Fan Control.
Heatsink Fan Step Up
This item allows you to set the value of the heatsink fan step up.
Conguration options: [0 sec] [2 sec] [4 sec] [8 sec] [16 sec] [32 sec]
HS Fan speeds will only change immediately when the Step Up and Step Down time is set
to 0 secs.
Heatsink Fan Step Down
This item allows you to set the value of the heatsink fan step up.
Conguration options: [0 sec] [2 sec] [4 sec] [8 sec] [16 sec] [32 sec]
HS Fan speeds will only change immediately when the Step Up and Step Down time is set
to 0 secs.