User Manual

ROG STRIX X299-E Gaming BIOS Manual
39
CPU Internal Power Configuration
CPU Integrated VR Efficiency Management
[Auto] Set to default mode.
[High Performance] Allow the FIVR (fully integrated voltage regulator) to work at high
performance at all times.
[Balanced] Improve power saving when the CPU is in a low power state.
Tweaker’s Paradise
VIN Tracker
Conguration options: [Auto] [Disabled] [Enabled]
Self-tracked Clocking
Set this item to [Enabled] to improve BCLK Overclock.
Conguration options: [Auto] [Disabled] [Enabled]
PCIe Gen3 PLL Clock Control
This item allows you to enable or disable PCIe Gen3 PLL Clock Control.
Conguration options: [Disabled] [Enabled]
PLL Post Divider Adjust
Set this item to [Enabled] when using a High base clock.
Conguration options: [Auto] [Enabled] [Disabled]
Change PLLTRIM Prefix
This item allows you to change the PLLTRIM prex.
Conguration options: [+] [-]
Change PllTrim Value
This item allows you to change the Pll value to between +50 and -50.
Conguration options: [Auto] [0] – [50]
Change MC-PLLTRIM Prefix
This item allows you to change the MC-PLLTRIM prex.
Conguration options: [+] [-]
Change MC-PllTrim Value
This item allows you to change the MC-Pll value to between +50 and -50.
Conguration options: [Auto] [0] – [50]
Turbo Residence Tweak 0~3
Setting smaller values may result in more optimistic turbo boosting. Use the <+> or
<-> to adjust the value. The values range from 0 to 16.
Initial BCLK Frequency
This item allows you to set a different BCLK value during POST. May be useful for
setting a lower BCLK in scenarios where memory training is not stable at a higher
BCLK (a large frequency gap between BCLK Frequency and Initial frequency is not
recommended). Applies the same value as BCLK Frequency if left at default. Use the
<+> or <-> to adjust the value. The values range from 40.0 MHz to 650.0 MHz.