User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 CPU Configuration
- 6.2 Platform Misc Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 CPU Storage Configuration
- 6.7 Onboard Devices Configuration
- 6.8 APM Configuration
- 6.9 USB Configuration
- 6.10 HDD/SSD SMART Information
- 6.11 NVMe Configuration
- 6.12 PCH-FW Configuration
- 6.13 Network Stack Configuration
- 6.14 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
22
ROG STRIX X299-E Gaming BIOS Manual
User Password
If you have set a user password, you must enter the user password for accessing the
system. The User Password item on top of the screen shows the default [Not Installed].
After you set a password, this item shows [Installed].
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Re-type to conrm the password then select OK.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press
<Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Re-type to conrm the password then select OK.
To clear the user password, follow the same steps as in changing a user password, but
leave other elds blank then select OK to continue. After you clear the password, the User
Password item on top of the screen shows [Not Installed].