User Manual
3-16
Chapter 3: BIOS Setup
Chapter 3
SATA Mode
This item allows you to set the SATA conguration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID conguration from
the SATA hard disk drives.
SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks.
Conguration options: [On] [Off]
SATA6G_1(Gray) - SATA6G_4(Gray)
SATA6G_1 - SATA6G_4
This item allows you to enable or disable the selected SATA port.
Conguration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode is set to [AHCI] and allows you to
enable or disable SATA Hot Plug Support.
Conguration options: [Disabled] [Enabled]
M.2(Gray)
Press <Enter> to rename AMD APU M.2 ports.
3.6.6 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and congure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Denition Audio Controller
Conguration options: [Disabled] [Enabled]
Audio Jack LED Lighting
This item allows you to turn the RGB LED lighting for the Audio Jack LED on or off.
[Disabled] The audio jack LEDs will not light up.
[Auto] The audio jack LEDs will light up.
The audio jack LEDs will light up during S0(Working), S3(Sleep), S4(Hibernation), S5(Soft
off) states. The LEDs will not light up when ErP Ready is Enabled at S5 state, or S4 and
S5 state.
E14337_ROG_STRIX_B450-I_GAMING_UM.indb 16 2018-06-15 18:28:39