User Manual
ROG STRIX B450-I GAMING
3-15
Chapter 3
PSS Support
This item allows you enable or disable the generation of ACPI_PPC, _PSS, and _PCT
objects.
Conguration options: [Disabled] [Enabled] [Auto]
SVM Mode
This item allows you enable or disable CPU Virtualization.
Conguration options: [Disabled] [Enabled]
3.6.2 CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items in this menu may vary based on the CPU installed.
3.6.3 ROG Effects
The item in this menu allows you to customize the effect settings for better ROG effects.
Onboard LED
This item allows you to turn on/off the onboard LED.
Conguration options: [Enabled] [Disabled]
3.6.4 NB Configuration
The items in this menu allow you to change the settings of the north bridge related items.
IGFX Multi-Monitor
This item allows you to enable or disable Internal Graphics Device Multi-Monitor Support for
add-on VGA devices.
Conguration options: [Enable] [Disable]
Primary Video Device
This item allows you to decide which graphics controller to use as the primary boot device.
Conguration options: [IGFX Video] [PCIE/PCI Video]
UMA Frame Buffer Size
This item allows you to select the UMA FB size.
Conguration options: [Auto] [32M] - [2G]
3.6.5 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
SATA Port Enable
This item allows you to enable or disable the SATA Device.
Conguration options: [Disabled] [Enabled]
E14337_ROG_STRIX_B450-I_GAMING_UM.indb 15 2018-06-15 18:28:39