User Manual

60
ROG STRIX Z390-E GAMING BIOS Manual
The following items appear only when you set M.2 Fan Prole to [Manual].
M.2 Fan Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the M.2 Fan
temperature. The M.2 Fan will operate at the maximum duty cycle when the
temperature source is higher than the limit.
M.2 Fan Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum M.2 Fan duty cycle. When
the temperature source reaches the upper limit, the M.2 Fan will operate at
the maximum duty cycle.
M.2 Fan Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the M.2 Fan
temperature.
M.2 Fan Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the M.2 Fan middle duty cycle.
M.2 Fan Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the M.2 Fan
temperature. The M.2 Fan will operate at the minimum duty cycle when the
temperature source is lower than the limit.
M.2 Fan Min. Duty Cycle (%)
Use the <+> or <-> keys to adjust the minimum M.2 Fan duty cycle. When
the temperature source is under the limit, the M.2 Fan will operate at the
minimum duty cycle.
Ext. Fan(s) Configuration
An ASUS FAN EXTENSION CARD is required to congure these items
Extension Fan 1-3 Q-Fan Control
[Disabled] Disable the Extension Fan Q-Fan control feature.
[DC mode] Enable the Extension Fan Q-Fan control in DC mode for 3-pin
extension fan.
[PWM mode] Enable the Extension Fan Q-Fan control in PWM mode for 4-pin
extension fan.
Extension Fan 1-3 Q-Fan Source
The assigned fan will be controlled according to the selected temperature source.
Conguration options: [CPU] [MotherBoard] [PCH] [T Sensor] [Water In T Sensor]
[Water Out T Sensor] [EXT_Sensor1] [EXT_Sensor2] [EXT_
Sensor3] [Multiple Sources]
For EXT_Sensor1-3, connect a Thermistor cable to one of these connectors, then
tape the other end on a critical component to control its temperature.
For Multiple Sources, select up to three temperature sources and the fan will
automatically change based on the highest temperature.