User Manual
Table Of Contents
- 1.1 Knowing BIOS
- 1.2 BIOS setup program
- 1.3 My Favorites
- 1.4 Main menu
- 1.5 Ai Tweaker menu
- 1.6 Advanced menu
- 1.6.1 Platform Misc Configuration
- 1.6.2 CPU Configuration
- 1.6.3 System Agent (SA) Configuration
- 1.6.4 PCH Configuration
- 1.6.5 PCH Storage Configuration
- 1.6.6 PCH-FW Configuration
- 1.6.7 Onboard Devices Configuration
- 1.6.8 APM Configuration
- 1.6.9 PCI Subsystem Settings
- 1.6.10 USB Configuration
- 1.6.11 Network Stack Configuration
- 1.6.12 NVMe Configuration
- 1.6.13 HDD/SSD SMART Information
- 1.7 Monitor menu
- 1.8 Boot menu
- 1.9 Tool menu
- 1.10 Exit menu
- 1.11 Updating BIOS
ROG STRIX Z390-E GAMING BIOS Manual
55
1.7 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the other BIOS items.
Chassis Intrusion Detection Support
This item allows you to turn Chassis Intrusion Detection Support on or off.
Conguration options: [On] [Off]
CPU Temperature, Motherboard Temperature, PCH temperature, T Sensor
Temperature, EXT_Sensor1-3 Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the component and sensor
temperatures. Select [Ignore] if you do not wish to display the detected temperatures.
CPU Fan Speed, CPU Optional Fan Speed, Chassis Fan 1-2 Speed, M.2
Fan Speed, W_PUMP+ Speed, AIO pump Speed, Extension Fan 1-3 Speed
[xxxx RPM]
The onboard hardware monitor automatically detects and displays the fan and pump speeds
in rotations per minute (RPM). If the fan or pump is not connected to the motherboard, the
eld shows N/A. Select [Ignore] if you do not wish to display the detected speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [x.xxxx V]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignore] if you do not want to detect this item.