User manual

2.8.2 Boot Logo Display [Auto]
[Auto] AdjustslogoautomaticallybasedonWindows
®
displayrequirements.
[FullScreen] Maximizethebootlogosize.
[Disabled] HidethelogoduringPOST.
POST Delay Time [3 sec]
ThisitemappearsonlywhenyousetBootLogoDisplayto[Auto]and[FullScreen].Thisitem
allowsyoutoselectthedesiredadditionalPOSTwaitingtimetoeasilyentertheBIOSsetup.
YoucanonlyexecutethePOSTdelaytimeduringNormalBoot.Thevaluesrangefrom0to
10seconds.
Thisfeaturewillonlyworkundernormalboot.
Post Report [5 sec]
ThisitemappearsonlywhenyousetBootLogoDisplayto[Disabled].Thisitemallowsyouto
selectadesiredpostreportwaitingtime.Congurationoptions:[1sec]~[10sec][UntilPress
ESC].
2.8.3 Bootup NumLock State [Enabled]
Thisitemallowsyoutoenableordisablepower-onstateoftheNumLock.Conguration
options:[Disabled][Enabled]
2.8.4 Wait for ‘F1’ If Error [Enabled]
Whenthisitemissetto[Enabled],thesystemwaitsfortheF1keytobepressedwhenerror
occurs.Congurationoptions:[Disabled][Enabled]
2.8.5 Option ROM Messages [Force BIOS]
[ForceBIOS] Thethird-partyROMmessageswillbeforcedtodisplayduringtheboot
sequence.
[KeepCurrent] Thethird-partyROMmessageswillbedisplayedonlyifthethird-party
manufacturerhadsettheadd-ondevicetodoso.
2.8.6 Interrupt 19 Capture [Disabled]
ThisitemallowsyoutotrapInterrupt19bytheoptionROMs.Congurationoptions:
[Disabled][Enabled]
2.8.7 Setup Mode [EZ Mode]
[AdvancedMode]ThisitemallowsyoutogotoAdvancedModeoftheBIOSafterPOST.
[EZMode] ThisitemallowsyoutogotoEZModeoftheBIOSafterPOST.
2-40 Chapter 2: Getting started