User manual

Creating RAID

TocreateRAID:

1. Press<F11>onyourkeyboardorclick fromtheBIOSscreentoopen

EZTuningWizardscreen.

2. ClickRAID



thenclickNext.

• EnsurethatyourHDDshavenoexistingRAIDvolumes.

• EnsuretoconnectyourHDDstoIntel

SATAconnectors.

3. SelectthetypeofstorageforyourRAIDEasy BackuporSuper Speed,thenclick

Next.

a. ForEasyBackup,click

NextthenselectfromEasy

Backup (RAID1)orEasy

Backup (RAID10).

4. AfterselectingthetypeofRAID,clickNextthenclickYestocontinuetheRAIDsetup.

5. AftertheRAIDsetupisdone,clickYestoexitthesetupthenclickOKtoresetyour

system.

YoucanonlyselectEasy

Backup(RAID10)ifyou

connectfour(4)HDDs.

b. ForSuperSpeed,clickNext

thenselectfromSuper

Speed (RAID0)orSuper

Speed (RAID5).

2-14 Chapter 2: Getting started