User manual

2.8.2 Boot Logo Display [Auto]
[Auto] AdjustslogoautomaticallybasedonWindows
®
displayrequrements.
[FullScreen] Maximizethebootlogosize.
[Disabled] HidethelogoduringPOST.
POST Delay Time [3 sec]
ThisitemappearsonlywhenyousetBootLogoDisplayto[Auto]and[FullScreen].Thisitem
allowsyoutoselectthedesiredadditionalPOSTwaitingtimetoeasilyentertheBIOSsetup.
YoucanonlyexecutethePOSTdelaytimeduringNormalBoot.Thevaluesrangefrom0to
10seconds.
Thisfeaturewillonlyworkundernormalboot.
2.8.3 Bootup NumLock State [Enabled]
Thisitemallowsyoutoenableordisablepower‑onstateoftheNumLock.Conguration
options:[Disabled][Enabled]
2.8.4 Wait for ‘F1’ If Error [Enabled]
Whenthisitemissetto[Enabled],thesystemwaitsfortheF1keytobepressedwhenerror
occurs.Congurationoptions:[Disabled][Enabled]
2.8.5 Option ROM Messages [Force BIOS]
[ForceBIOS] TheOptionROMMessageswillbeshownduringthePOST.
[KeepCurrent] OnlytheASUSlogowillbeshownduringthePOST.
2.8.6 Interrupt 19 Capture [Disabled]
[Enabled] AllowstheoptionROMstotrapInterrupt19.
[Disabled] Disablesthisfunction.
2.8.7 Setup Mode [EZ Mode]
[AdvancedMode]ThisitemallowsyoutogotoAdvancedModeoftheBIOSafterPOST.
[EZMode] ThisitemallowsyoutogotoEZModeoftheBIOSafterPOST.
2.8.8 CSM (Compatibility Support Module)
AllowsyoutoconguretheCSM(CompatibilitySupportModule)itemstofullysupportthe
variousVGA,bootabledevices,andadd‑ondevicesforbettercompatibility.
Launch CSM [Enabled]
[Auto] Thesystemautomaticallydetectsthebootabledevicesandtheadd‑on
devices.
[Enabled] Forbettercompatibility,enabletheCSMtofullysupportthenon‑UEFI
driveradd‑ondevicesortheWindows
®
UEFImode.
[Disabled] DisabletheCSMtofullysupporttheWindows
®
SecurityUpdateand
SecurityBoot.
2-42 Chapter 2: Getting started