User manual

Parallel Port Configuration
Thesub‑itemsinthismenuallowyoutosettheparallelportconguration.
Parallel Port [On]
Allowsyoutoenableordisabletheparallelport(LPT/LPTE).
Congurationoptions:[On][Off]
ThefollowingitemsappearonlywhenyousettheParallel Port Configuration itemto
[Enabled].
Change Settings [Auto]
AllowsyoutoselectanoptimalsettingforSuperI/Odevices.Conguration
options:[Auto][IO=378h;IRQ=5;][IO=378h;IRQ=5,6,7,9,10,11,12;][IO=278h;
IRQ=5,6,7,9,10,11,12;][IO=3BCh;IRQ=5,6,7,9,10,11,12;]
Device Mode [STD Printer Mode]
AllowsyoutoselectthePrinterPortmode.Congurationoptions:[STDPrinterMode]
[SPPMode][EPP‑1.9andSPPMode][EPP‑1.7andSPPMode][ECPMode][ECP
andEPP1.9Mode][ECPandEPP1.7Mode]
2.6.8 APM Configuration
ErP Ready [Disabled]
AllowsBIOStoswitchoffsomepoweratS5togetthesystemreadyforErPrequirement.
Whensetto[Enabled],allotherPMEoptionswillbeswitchedoff.
Congurationoptions:[Enabled][Disabled]
Deep S4 [Disabled]
AllowsyoutoenableordisableenteringdeepS4sleepmode.ThesystemindeepS4state
canbewokenupviapowerbutton.Congurationoptions:[Enabled][Disabled]
Restore AC Power Loss [Power Off]
[PowerOn] ThesystemgoesintoonstateafteranACpowerloss.
[PowerOff] ThesystemgoesintooffstateafteranACpowerloss.
[LastState] Thesystemgoesintoeitherofforonstate,whateverthesystemstatewas
beforetheACpowerloss.
Power On By PS/2 Keyboard [Disabled]
[Disabled] DisablesthePowerOnbyaPS/2keyboard.
[SpaceBar] SetstheSpaceBaronthePS/2keyboardtoturnonthesystem.
[Ctrl‑Esc] SetstheCtrl+EsckeyonthePS/2keyboardtoturnonthesystem.
[PowerKey] SetsPowerkeyonthePS/2keyboardtoturnonthesystem.Thisfeature
requiresanATXpowersupplythatprovidesatleast1Aonthe+5VSBlead.
Power On By PCI-E/PCI [Disabled]
ThisitemallowsyoutoenableordisabletheWake‑on‑LANfunctionoftheonboardLAN
controllerorotherinstalledPCIe/PCILANcards.Congurationoptions:[Disabled][Enabled]
2‑36 Chapter 2: Getting started