User manual

Chassis Fan 1/2/3 Max. Duty Cycle(%) [100]
Use the <+> or <‑> keys to adjust the maximum chassis fan duty cycle. The values
range from 60% to 100%. When the chassis temperature reaches the upper limit, the
chassis fan will operate at the maximum duty cycle.
Chassis Fan 1/2/3 Middle Temperature [45]
Use the <+> or <‑> keys to set the value for chassis fan middle temperature.
Chassis Fan 1/2/3 Middle Duty Cycle(%) [60]
Use the <+> or <‑> keys to adjust the chassis fan middle duty cycle. The values range
from 60% to 100%.
Chassis Fan 1/2/3 Lower Temperature [40]
Use the <+> or <‑> keys to adjust the chassis fans’ lower temperature. The values
range from 40°C to 75°C.
Chassis Fan 1/2/3 Min. Duty Cycle(%) [60]
Use the <+> or <‑> keys to adjust the minimum chassis fan duty cycle. The values
range from 60% to 100%. When the CPU temperature is under the lower limit, the
chassis fan operates at the minimum duty cycle.
Allow Fan Stop [Disabled]
This function allows the fan to run at 0% duty cycle when the temperature of the source
is dropped below the lower temperature. Conguration options: [Disabled] [Enabled]
2.7.6 Extension Fan 1/2/3 Q-Fan Control [DC Mode]
[PWM mode] Enables the extension Q‑Fan control in PWM mode for 4‑pin chassis fan.
[DC mode] Enables the extension Q‑Fan control in DC mode for 3‑pin chassis fan.
[Disabled] Disables the extension Q‑Fan control feature.
The following items appear only when you set the Extension Fan 1/2/3 Q‑Fan Control to
[PWM Mode] or [DC Mode].
Extension Fan 1/2/3 Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Conguration options: [CPU] [MotherBoard] [VRM] [PCH] [T_Sensor] [EXT_Sensor1] [EXT_
Sensor2] [EXT_Sensor3]
Extension Fan 1/2/3 Speed Low Limit [300 RPM]
This item allows you to disable or set the extension fan warning speed. Conguration options:
[Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Extension Fan 1/2/3 Profile [Standard]
This item allows you to set the appropriate performance level of the extension fan.
[Standard] Sets to [Standard] to make the extension fan automatically adjust
depending on the chassis temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet extension fan operation.
[Turbo] Sets to [Turbo] to achieve maximum extension fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
ASUS H170 PRO GAMING 2‑37