User manual

4-14
Chapter 4: Software Support
Chapter 4
Click to select a USB device
Click to enable the USB
device’s normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate
USB 3.1 Boost
USB3.0BoosttechnologysupportsUASP(USBAttachedSCSIProtocol)thatautomatically
speedsupthetransferratesofyourUSBstoragedevices.
Launching USB 3.1 Boost
TolaunchUSB3.0Boost,click ontheleftoftheAISuite3mainmenu,thenselect USB
3.1 Boost.
Using the USB 3.1 Boost
• USB3.1BoostautomaticallydetectstheUSBdevicesthatsupportUASP.Foralistof
UASP-supportedUSBdevices,visittheASUSwebsiteatwww.asus.com.
• ThedatatransferspeedvarieswithUSBdevices.Forahigherdatatransfer
performance,useaUSB3.1device.
EnsuretoconnectyourUSB3.0or3.1devicetotheUSBportsthatsupportUSB3.1
Boost.RefertotheRear I/O connection section ofyouruserguideformoredetails.