Manualshelf

User manual

ManualsBrandsASUS ManualsMotherboardsMainboard MAXIMUS VIII RANGER PC base Intel® 1151 Form factor ATX Motherboard chipset Intel® Z170
919293949596979899100
3-16
Chapter 3: BIOS Setup
Chapter 3
CPU Power Phase Control [Auto]
This item allows you to set the power phase control of the CPU.
Conguration options: [Auto] [Standard] [Optimized] [Extreme] [Power Phase
Response]
DO NOT remove the thermal module when setting this item to [Extreme] or [Power Phase
Response]. The thermal conditions should be monitored.
CPU Power Thermal Control [115]
Higher temperature provides a wider CPU power thermal range and extends the
overclocking tolerance to enlarge the overclocking potential.
Conguration options: [115] - [136]
DO NOT remove the thermal module. The thermal conditions should be monitored
CPU Graphics Load-line Calibration [Auto]
The load-line is dened by the Intel VRM specication and affects the GT power
voltage. The GT working voltage will decrease proportionally depending on the GT
loading.
Conguration options: [Auto] [Level 0] - [Level 10]
The boosted performance may vary depending on the GT specication. DO NOT remove
the thermal module.
CPU Graphics Current Capability [Auto]
This item adjusts the total power range for GT overclocking. A higher value setting
provides higher power consumption delivery and extends the overclocking frequency
range simultaneously.
Conguration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Congure higher values when overclocking or under a high GT loading for extra power
support.
CPU Graphics Switching Frequency [Auto]
This item affects the graphics transient response speed and the component thermal
production. Select [Manual] to congure a higher frequency for a quicker transient
response speed.
Conguration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.
The following item appears only when you set the CPU Graphics Switching Frequency to
[Manual].
Fixed CPU Graphics Switching Frequency (KHz) [300]
This item allows you to set a higher frequency for a quicker transient
response speed. Use the <+> or <-> to adjust the value. The values range
from 300 KHz to 600 KHz with an interval of 50 KHz.