Manualshelf

User manual

ManualsBrandsASUS ManualsMotherboardsMainboard MAXIMUS VIII RANGER PC base Intel® 1151 Form factor ATX Motherboard chipset Intel® Z170
151152153154155156157158159160
ASUS MAXIMUS VIII RANGER
4-21
Chapter 4
Click to select a USB device
Click to enable the USB
device’s normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate
USB 3.1 Boost
USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically
speeds up the transfer rates of your USB storage devices.
Launching USB 3.1 Boost
To launch USB 3.0 Boost, click on the left of the AI Suite 3 main menu, then select USB
3.1 Boost.
Using the USB 3.1 Boost
• USB 3.1 Boost automatically detects the USB devices that support UASP. For a list of
UASP-supported USB devices, visit the ASUS website at www.asus.com.
• The data transfer speed varies with USB devices. For a higher data transfer
performance, use a USB 3.1 device.
Ensure to connect your USB 3.0 or 3.1 device to the USB ports that support USB 3.1
Boost. For more details, refer to section Rear I/O connection.