User Manual
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Cable management
- 2.3 Adjusting the monitor
- 2.4 Detaching the arm (for VESA wall mount)
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported operating mode
- Chapter 1: Product introduction
- Chapter 2: Setup
- Chapter 3: General instructions
2-5ROG Strix XG258Q Series Gaming LCD Monitor
2.5 Connecting the cables
Connect the cables as the following instructions:
To connect the power cord• :
Connect the power adapter securely to the monitor’s DC input.a.
Connect one end of the power cord to the power adapter and the other b.
end to a power outlet.
To connect the DisplayPort/HDMI cable• :
Plug one end of the DisplayPort/HDMI cable to the monitor’s a.
DisplayPort/HDMI port.
Connect the other end of the DisplayPort/HDMI cable to your computer's b.
DisplayPort/HDMI port.
To use the earphone:• connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
2.6 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator
lights up in white to show that the monitor is ON.