User Manual
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Cable management
- 2.3 Adjusting the monitor
- 2.4 Detaching the arm (for VESA wall mount)
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported operating mode
- Chapter 1: Product introduction
- Chapter 2: Setup
- Chapter 3: General instructions
2-4 Chapter 2: Setup
2.4 Detaching the arm (for VESA wall
mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:
1. Have the front of the monitor face down on a table.
2. Remove the covers on where the monitor and the arm meet.
3. Loosen the four screws on the back of the monitor and remove the arm/base.
1 2 3 4
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
The VESA wall mount kit (100 x 100 mm) is purchased separately.•
Use only the UL Listed Wall Mount Bracket with minimum weight/load •
22.7kg (Screw size: M4 x 10 mm)