User manual
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Adjusting the monitor
- 2.3 Connecting the cables
- 2.4 Turning on the monitor
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary (VX248H)
- 3.2 Specifications summary (VX248N)
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported operating modes
2-2 Chapter 2: Setup
2.3 Connecting the cables
1. Connect the cables as the following instructions:
VX248H
VX248N
VGA
DVI
HDMI
Earphone jack
Audio-in
:
a. Connect the power adapter securely to the monitor’s DC input port.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
:
a. Plug one end of the VGA/DVI/HDMI cable to the monitor’s VGA/DVI/
HDMI port.
b. Connect the other end of the VGA/DVI/HDMI cable to your computer’s
VGA/DVI/HDMI port.
c. Tighten the two screws to secure the VGA/DVI connector.
:connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
connect the end with plug type to the monitor’s
earphone jack when an HDMI signal is fed.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.4 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator
lights up in white to show that the monitor is ON.