Instructions

8
Power LED
O: No power.
On: Device is ready.
Flashing slow: Rescue mode.
LED On/O button
This button turns on/off the LED indicators.
Power (DC-IN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
Power switch
Press this button to power on or off the system.
Reset button
This button resets or restores the system to its factory default settings.
USB 3.2 Gen 1 ports
Insert a USB 3.2 Gen 1 device such as a USB hard disk or a USB flash drive into this port.
Insert your iPad’s USB cable into this port to charge your iPad.
2.5G port
Connect a network cable into this port to get 2Gbps speed.
WAN (Internet) port
Connect a network cable into this port to establish WAN connection.
LAN 1~4 ports
Connect network cables into these ports to establish LAN connection.
WPS button
This button launches the WPS Wizard.
NOTES:
• Use only the adapter that came with your package. Using other
adapters may damage the device.
• Specications:
DC Power adapter DC Output: +19V with 2.37A current
DC Output: +19.5V with 2.31A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%