User manual

English
6
Frequently Asked Questions
Q1: What should I do if my router does not support WPS?
 •YoucanuseOptionAtosetupRP-AC68U.
Q2: Why is that the Wi-Fi LED does not light up after completing Method Two?
 •YoumayhaveenteredthewrongrouterSSIDandpassword.ResetyourRP-AC68U,doublecheckyourrouterSSID/password,and
set up RP-AC68U again.
Q3: Why is it that I cannot see the login page after entering http://repeater.asus.com in the browser?
 •Ensurethatyourcomputerisconnectedtotherepeaternetworkonly,andsetyourcomputertoObtain an IP address automat-
ically.
Q4: My router security is WEP, and I entered a wrong passphrase or security key on the repeater. Now I
cannot access the Repeater any more. What can I do?
 •TheRepeatercannotcheckwhethertheWEPpassphraseiscorrectornot.Whenenteredawrongpassphrase,yourwireless
device cannot get the correct IP address from the Repeater. Please reset the Repeater to its factory defaults to get the IP address
back.
Q5: How do I reset RP-AC68U?
• Press the RESET button at the bottom of RP-AC68U for about two (2) seconds. Wait for about ve (5) seconds until the Wi-Fi LEDs
blink slowly.
Q6: Why doesn’t the 5GHz signal indicator of the Repeater light up?
 •Checkwhetheryourroutersupports5GHzband.Ifyourrouterissingleband,theRepeater’s5GHzSignalIndicatorwillnotlight
up and it works at 2.4GHz band only.
U10787_RP-AC68U_QSG.indb 6 2015-10-19 15:22:32