User manual

166
Declaration of Conformity for R&TTE directive 1999/5/EC
Essential requirements – Article 3
Protection requirements for health and safety – Article 3.1a
Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sucient.
Protection requirements for electromagnetic compatibility – Article 3.1b
Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant
and sucient.
Eectiveuseoftheradiospectrum–Article3.2
TestingforradiotestsuitesaccordingtoEN300328-2hasbeenconducted.Theseareconsideredrelevantandsucient.
CE Mark Warning
ThisisaClassBproduct,inadomesticenvironment,thisproductmaycauseradiointerference,inwhichcasetheusermayberequiredtotake
adequatemeasures.OperationChannels:CH1~11forN.America;Ch1~13forJapan;CH1~13forEurope(ETSI)
Canada, Industry Canada (IC) Notices
ThisClassBdigitalapparatuscomplieswithCanadianICES-003andRSS-247.
Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)Thisdevicemustacceptany
interference,includinginterferencethatmaycauseundesiredoperationofthedevice.
FCC Mark Warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be
installedtoprovideaseparationdistanceofatleast20cmfromallpersonsandmustnotbeco-locatedoroperatedinconjunctionwithanyother
antennas or transmitters. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specic operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance
requirement,pleasefollowoperationinstructionasdocumentedinthismanual.
U10787_RP-AC68U_QSG.indb 166 2015-10-19 15:23:00