User Guide

7-1
7
▼ ▼ ▼ ▼
SCO UnixWare Installation
This chapter explains how to install the Adaptec 7800 Family
Managers Set Driver
adsl20
or
adsl
(UltraSCSI) and
adsb20
or
adsb
(Ultra2 SCSI) for SCO UnixWare—SCO UnixWare 2.0x and SCO
UnixWare 2.1.
adsl20
and
adsb20
drivers (or packages) are used with SCO
UnixWare 2.0x. The
adsl
and
adsb
drivers (or packages) are used
with SCO UnixWare 2.1. The
adsl
and
adsl20
support Ultra SCSI
and earlier Adaptec 7800 host adapters. The
adsb
and
adsb20
drivers support Ultra2 Adaptec 7800 host adapters. Refer to the
Adaptec 7800 Family host adapters on page 1-3.
If you are performing a first time SCO UnixWare installation, see
Installing the Driver When Installing SCO UnixWare
on page 7-2 to
begin driver installation. If SCO UnixWare is already installed in
your system, see
Installing the Driver When SCO UnixWare is Already
Installed
on page 7-3.