User Guide

vii
Contents
6 SCO UNIX Installation
Installing the Driver When Installing SCO UNIX 6-2
Installing SCO UNIX 3.2 v4.2, SCO ODT 3.0, or
SCO OpenServer 3.0 6-2
Installing SCO OpenServer 5 6-4
Installing the Driver When SCO UNIX is Already
Installed 6-5
Perform a System Backup 6-6
Use the Install Package 6-7
Modify the mscsi File 6-8
Rebuild the UNIX Kernel 6-9
Boot the New Kernel 6-10
Using SCO UNIX and the Host Adapter 6-10
Using Multiple Host Adapters 6-10
Changing the Boot Disk 6-10
Using Wide SCSI Host Adapters and Devices 6-11
Using Tunable Parameters for the alad Driver 6-11
Enabling Scatter/Gather and Tagged Queuing 6-12
Troubleshooting 6-13
Problems and Solutions 6-13
Error Messages 6-17
7 SCO UnixWare Installation
Installing the Driver When Installing SCO UnixWare 7-2
Installing the Driver When SCO UnixWare is Already
Installed 7-3
Back Up the Computer 7-4
Load the Package 7-4
Modify the New System File 7-6
Rebuild the SCO UnixWare Kernel 7-7
Boot the New Kernel 7-7
Using SCO UnixWare and the Host Adapter 7-8
Using Tunable Parameters 7-8
Using Multiple Host Adapters 7-8
Removing the Driver 7-9